|
Dear Electronics Professional:
We have launched a new product concept at Emcraft Systems and are looking for feedback. This is a small SmartFusion system-on-module that includes Cortex-M3, FPGA, PSRAM/Flash and an Ethernet PHY, and is "uClinux-ready".
We have two concepts we are exploring:
- CS288 based module, 25mm x 35mm
- FG484 based module, 30mm x 50mm
If you are interested in getting the hardware architecture document for these modules, or providing some feedback, please send email to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
.
Here are the main hardware features of the SOM:
| CS288-SOM |
FG484-SOM |
(click to view larger image)
|
(click to view larger image)
|
- Miniature (25mm x 35mm) mezzanine module
- 39 uncommitted FPGA signals on the connection headers
- 100 MHz A2F200-CS288 SmartFusion cSOC
|
- Small (30mm x 50mm) mezzanine module
- 99 uncommitted FPGA signals on the connection headers
- 100 MHz A2F500-FG484 SmartFusion cSOC
|
- Powered from +3.3V; on-module power conversion, sequencing and fault detection
- JTAG interface to SmartFusion
- On-module clocks
- 16 MBytes of PSRAM
- 8, 16 or 32 MBytes of NOR Flash
- Serial console interface at UART CMOS levels
- 802.3 Ethernet interface
- WDT
- Real-Time Counter
- Optimized for low-power operation at static times
- 2 x 80 pin Hirose DF40 series connectors 0.4 mm pitch
- Mounting hole
|
|
